Hardware, Fasteners & Fittings for 2009 Hummer H3T
No.
Part # / Description / Price
Price
1
Crankshaft Balancer Kit with Washer 
GM
GM Description: Canyon, Colorado. 3.7L. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
3
Cover Asm-Eng Frt (W/ O/Pmp) GM
GM Description: 4.2L. All models. 2.8 & 2.9L. Canyon, Colorado. Hummer H3. 3.7L.
4
Front Crankshaft Oil Seal Kit GM
GM Description: 2.8 & 2.9L. Canyon, Colorado. Step On Hub. All models. 2nd design. 4.2L. 3.7L. Seals the openings on either end of the crankshaft for a tight seal
Withstands heat and pressure to help prevent the engine from leaking oil
This GM Genuine Part is designed, en ...
MSRP $28.18
$19.60
MSRP $28.18
$19.60
4
Crankshaft Rear Oil Seal Kit GM
GM Positions: Rear
Description: Canyon, Colorado. Seals the openings on either end of the crankshaft for a tight seal
Withstands heat and pressure to help prevent the engine from leaking oil
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Original equipment parts are designed to work with your GM vehicle safety systems -- aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
MSRP $42.69
$29.06
MSRP $42.69
$29.06
5
Camshaft Cover GM
GM Description: Canyon, Colorado. 3.7L. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
.
6
Camshaft Cover Gasket Kit with Seals GM
GM Description: Canyon, Colorado. 3.7L. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
MSRP $150.45
$99.87
MSRP $150.45
$99.87
7
Engine Oil Filler Cap GM
GM Description: Helps seal and keep oil from leaking out of your vehicle's engine oil filler opening
This GM Genuine part is designed, engineered and tested to rigorous standards, and are backed by General Motors
MSRP $19.82
$12.23
MSRP $19.82
$12.23
8
Engine Oil Filler Cap O-Ring GM
GM Notes: PARTS: Part included with filler cap.
Description: These are priced and sold Individually.
GM Genuine Parts Multi-Purpose O-Ring are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles.
GM Genuine Parts Multi-Purpose O-Ring are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles.
MSRP $29.35
$18.20
MSRP $29.35
$18.20
9
Pan,Oil GM
GM Description: Canyon, Colorado. 4wd. 3.7L. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
.
10
Multi-Purpose Threaded Plug GM
GM Notes: PARTS: Part included with oil pan.
Description: These are Sold Individually.
MSRP $11.39
$8.00
MSRP $11.39
$8.00
11
Indicator,Oil Lvl GM
GM Description: 2.8 & 2.9L. 3.7L. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
.
MSRP $115.07
$77.36
MSRP $115.07
$77.36
12
Seal-Oil Lvl Ind (O Ring) Red GM
GM Notes: PARTS: Part included with dipstick.
Description: Helps prevent leaks in various components of your vehicle
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Original equipment parts are designed to work with your GM vehicle safety systems -- aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
MSRP $17.88
$12.43
MSRP $17.88
$12.43
13
MSRP $58.62
$39.91
16
Fitting-Oil Fltr GM
GM Description: 2.8 & 2.9L. 3.5 & 3.9L. 3.5L. Collar. 3.7L. 4.0L, fitting. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
MSRP $13.50
$9.49
MSRP $13.50
$9.49
17
Engine Oil Filter Drain Deflector GM
GM Description: 3.7L. 5.3L. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
18
Push-Pin GM
GM Description: This push-pin is a factory replacement component designed to match the original part's fit and function.
Parts can require replacement due to normal wear, environmental exposure, or damage over time.
Installing a new push-pin helps restore proper operati ...
MSRP $7.82
$5.49
MSRP $7.82
$5.49
Related Parts
Part # / Description / Price
Price
Multi-Purpose Bolt GM
GM Description: These are Sold Individually. 6 x 1 x 30mm. Fastens vehicle's components togetherThis GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Original equipment parts are designed to work with your GM vehicle safety systems -- aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
Original equipment parts are designed to work with your GM vehicle safety systems -- aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
MSRP $7.40
$5.20
MSRP $7.40
$5.20
M10x133.5 Multi-Purpose Bolt GM
GM Description: 10 x 1.5 x 133.5mm. 10 x 1.5 x 140.5mm. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
MSRP $8.58
$6.04
MSRP $8.58
$6.04
Engine Cylinder Head Bolt GM
GM Description: These are Sold Individually. 11 x 2 x 140.3mm. 11 x 2 x 140mm.
MSRP $74.40
$52.30
MSRP $74.40
$52.30
Engine Cylinder Head Oil Gallery Plug GM
GM Description: Location-Cylinder Head. All Required. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
MSRP $13.38
$9.42
MSRP $13.38
$9.42
Plug-Core Hole GM
GM Description: 5/8". Location-Engine Block. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
MSRP $7.94
$5.58
MSRP $7.94
$5.58