Powertrain Control for 2013 Cadillac Escalade EXT
ECM
This part requires programming and/or special setup procedures GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Dictates the operation of your vehicle's vital systems, which is critical to the performance of your vehicle
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Mount Bracket
6.0L. 4.8, 5.3, 6.0 & 6.2L. 4.3L. 2008-09. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors Original equipment parts are designed to work with your GM vehicle safety systems - aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
Bracket
2003-05, 5.3L. 6.2L without supercharger. 6.0 & 6.2L. 7.0L. 2008-09. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Wire
4.8, 5.3, 6.0 & 6.2L. 2003-05, 5.3L. 6.2L without supercharger. Wire connector. 7.0L. 2008-09. Insulated to help protect the interior conductor wire Form fitting boots on each end prevent moisture from entering the coil or distributor
High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
1/2 ton. 5.3l. 6.0l. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Valve Assembly
Some applications require a new connector and harness. Please message your VIN and for details if your vehicle requires this update.
Purge Valve
Controls vapor flow from canister to engine
M.A.P Sensor
Without diesel, 4.8, 5.3 & 6.0L. Without diesel, 4.3L.
M.A.P Sensor Retainer
6.0L. 1/2 ton. 2010-13. 5.3L. 2008-09. , 3/4 ton. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Ft Oxygen Sensor, Left
This part requires programming and/or special setup procedures GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Rear Oxygen Sensor, Left
This part requires programming and/or special setup procedures GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle Detects oxygen content in the exhaust gases to help optimize emissions This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Suburban, Yukon XL. 5.3l. Avalanche. 1/2 ton. 6.0l. Hummer H2. Escalade EXT, esv. Helps reduce harmful pollutants from entering the atmosphere Captures fuel vapors to be re-burned in the engine This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Related Parts
Camshaft Position Sensor
Helps keep engine timing and fuel injection running in sync. Helps provide proper alignment, positioning, and spacing for easy installation. Synchronizes engine valves and pistons for excellent engine performance.
Coolant Temp Sensor
Helps keep engine running at proper temperature. Alerts vehicle operator of high engine temperature conditions.
Helps keep engine timing and fuel injection running in sync Helps provide proper alignment, positioning, and spacing for easy installation Synchronizes engine valves and pistons for excellent engine performance Manufactured to GM OE specification for fit, form, and function
Knock Sensor
Sends signals to the engine control module (ECM) to adjust timing Helps prevent damage to the engine caused by pre-ignition
Mass Air Flow Sensor
Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors.