Propeller Shaft for 1992 GMC K1500 Pickup

Universal Joints
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Slip Yoke
All models. Yukon XL, Suburban. 2wd. 1/2 ton. 4 speed. Avalanche. 2wd. 4 speed m30 (4l60e). Escalade. 2wd. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Clutch Disc
Right. All models. 8.50, 8.625. Express, savana. S-series. Avalanche, Escalade EXT. 8.625. Escalade ESV. 8.625. Blazer/Sonoma/S10. Bravada/Envoy/Trailblazer. 129 wheelbase. Tahoe, Yukon, Escalade. Rainier. 5.3l. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Governor
All models. S-series. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Axle Cover
All models. 8.50, 8.625. Express, savana. S-series. G10-20 vans. 8.6 ring rear. 1/2 ton. Ring Gear 8.50". Ring Gear 8.625". Blazer/Sonoma/S10.
Cover Gasket
All. 8.6 ring rear. S-series. G10-20 vans. Express, savana. 3/4 ton. Blazer/Sonoma/S10. 1500. 8.50" & 8.625" ring gear without quadrasteer. 1/2 TON. 8.625 ring gear. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Axle Seals
Helps keep dirt and water out of your axle shaft assembly Conforms to the rotating surface to help provide leak-free operation This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Shaft Bearings
Supports and allows the axle shaft to rotate with minimal friction
All models. S-series. Blazer/Sonoma/S10. With limited slip. 3.08 ratio.
Without limited slip. All models. Express, savana. Blazer/Sonoma/S10. Without positraction.
Pinion Washer
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Side Washer
Right. Side washers. All. Without limited slip. G10-20 vans. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Side Washer
All models. Left. Tahoe, Yukon, Escalade. Avalanche, Escalade EXT. Escalade ESV. With limited slip. Yukon XL, Suburban. Limited Slip Differential. .024". This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Pinion Washer
All models. Without limited slip. 8.625. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Ring & Pinion
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors Original equipment parts are designed to work with your GM vehicle safety systems - aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
All models. 3.42 ratio. Buick, chevrolet, olds. 3.42 gear ratio. 8.50 ring gear.
Ring & Pinion
All models. 8.50, 8.625. 3.08 ratio. S-series. 3.08 ratio. Buick, chevrolet, olds. 3.08 gear ratio. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors Original equipment parts are designed to work with your GM vehicle safety systems - aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
Ring & Pinion
All models. 8.50, 8.625. 4.10 ratio. Silverado, sierra. 8.50, 8.625. 4.10 ratio. Tahoe, Yukon, Escalade. 8.50, 8.625. 4.10 ratio. S-series. 4.10 ratio. Bravada/Envoy/Trailblazer. 129 wheelbase. Escalade ESV. 8.625. 4.10 ratio. Avalanche, Escalade EXT. 8.62 ...
Pinion Bearings
Help minimize wear and friction in a variety of applications on your vehicle This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
All models. S-series. Express, savana. Ring Gear 8.50". Ring Gear 8.625". Exc.Triple Lip.

Axle Cover
All models. 9.50. Express, savana. 9.5 ring rear. Buick, chevrolet, olds. 9.00 ring gear. Without chip collector. 1/2, 3/4 & 1 ton, 1996 new style, 3/4 ton.
Axle Shafts
All models. All. 4wd. 1995-00, 3/4 & 1 ton with 9.5 ring gear, 4wd. Ring Gear 9.50".
Axle Seals
Helps keep dirt and water out of your axle shaft assembly Conforms to the rotating surface to help provide leak-free operation This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Shaft Bearings
Help minimize wear and friction in a variety of applications on your vehicle
Differential Case
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Differential Case
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Side Bearings
Low friction rotating elements that support the drive axle differential carrier within the axle or final drive housing This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Side Gear
All models. With limited slip. Left. Express, savana. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Side Gear
All models. With limited slip. Express, savana. Right. Splined. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Pinion Shaft
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Pinion Shaft
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Ring & Pinion
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors Original equipment parts are designed to work with your GM vehicle safety systems - aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
Ring & Pinion
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors Original equipment parts are designed to work with your GM vehicle safety systems - aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
Express, savana. 3.42 ratio. All models. 9.50. 3.42 ratio. Buick, chevrolet, olds. 3.42 gear ratio. 9.00 ring gear.
Pinion Seal
All. G30 vans. Express, savana. Buick, chevrolet, olds. 9.00 ring gear. Ring Gear 9.50".

Universal Joints
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Companion Flange
All models. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Outer Pinion Bearing
Help minimize wear and friction in a variety of applications on your vehicle This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Hub Seals
All models. Exc.Ring Gear 10.50". This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Inner Bearing
All models. Incl.Race. Ring Gear 11.50". Exc.Ring Gear 10.50". Ring Gear 12.00". Allows the wheel to rotate with minimal friction Supports the weight of the vehicle Maximum lateral stiffness for optimum ride, handling, and driving dynamics GM OE parts are built to help withstand potholes and designed to maximize seal life GM OE bearing designs are dimensionally optimized to work with their mating parts
Retaining Ring
All models. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
All models. Incl.Race. Ring Gear 11.50". Exc.Ring Gear 10.50". Ring Gear 12.00".
Inner Pinion Bearing
Ring Gear 11.50". Ring Gear 10.50". Gvw 9,900 lbs. Help minimize wear and friction in a variety of applications on your vehicle
Ring & Pinion
All models. 5.13 ratio. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors Original equipment parts are designed to work with your GM vehicle safety systems - aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
Pinion Gear
All models. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Side Gear
All models. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
All models. Ring Gear 11.50". This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Axle Cover
All models. Ring Gear 11.50". Vendor #42434. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors