Rear Axle for 1989 Chevrolet C1500
Inner Seal
Ring Gear 10.50". Dual Rear Wheels. 13 x 2.5" Rear Brakes. Helps prevent contaminants from entering your vehicle's wheel hub This GM Genuine part is designed, engineered and tested to rigorous standards, and are backed by General Motors
Retaining Ring
2wd. All models. 10.50" ring gear. 11.50" ring gear. 1995-00 3/4 & 1 ton with 10.5" ring gear. 1/2, 3/4 & 1 ton, 1996 new style,. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Hub
Without duals. All models. Without dual wheels. 1 ton without dual whls. Ring Gear 10.50". Provides the attaching point for the brake rotor and road wheel Supported and allowed to rotate by the wheel bearing GM OE bearing designs are dimensionally optimized to work with their mating parts
Hub
1995-00. 1 ton with dual wheels. Dual Rear Wheels. Supports the vehicle while allowing the wheel to rotate
Maximum lateral stiffness for optimum ride, handling, and driving dynamics
GM OE parts are built to help withstand potholes and designed to maximize seal life
GM OE bearing designs are dimensionally optimized to work with their mating parts
Axle Shafts
All models. Right side. 3/4 & 1 ton with 10.5 ring gear, with dual wheels.
Axle Shafts
All models. Right side. 3/4 & 1 ton with 10.5 ring gear, without dual wheels.
Axle Shafts
All models. Left side. 3/4 & 1 ton with 10.5 ring gear, without dual wheels.
Axle Shafts
All models. Left side. 3/4 & 1 ton with 10.5 ring gear, with dual wheels.
Gasket
All models. Disc brakes, 3/4 & 1 ton. 10.50" ring gear. 11.50" ring gear. 1995-00 3/4 & 1 ton with 10.5" ring gear. Disc brakes without sierra c3 or denali. 1/2, 3/4 & 1 ton, 1996 new style,. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Cover Gasket
All models. Express, savana. 1 ton. 14 bolt. Exc.Dana Axle. 10.50" ring gear. Suburban 3500hd. 2500. 1/2, 3/4 & 1 ton, 1996 new style, 3/4 & 1 ton. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Companion Flange
All. G10-20 vans. G30 vans. 8.5 ring gear. Without 7 1/2 ring gear. Blazer/Sonoma/S10. S-series. Manual trans. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Universal Joints
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Axle Shafts
30, with 8.5 ring gear. 2wd, 3/4 & 1 ton, gm, 9.50 gear. All models. Right. 3/4 ton, 9.5 gear. G30 vans.
Hub Seals
Ring Gear 10.50". Dual Rear Wheels. 13 x 2.5" Rear Brakes. Helps prevent contaminants from entering your vehicle's wheel hub This GM Genuine part is designed, engineered and tested to rigorous standards, and are backed by General Motors
Inner Bearing
Help minimize wear and friction in a variety of applications on your vehicle This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Outer Bearing
Allows the wheel to rotate with minimal friction Supports the weight of the vehicle Maximum lateral stiffness for optimum ride, handling, and driving dynamics GM OE parts are built to help withstand potholes and designed to maximize seal life GM OE bearing designs are dimensionally optimized to work with their mating parts
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Pinion Gear
All models. Without limited slip. 10.50. Silverado, sierra. 10.50. Express, savana. With limited slip. 9.50, 10.50. Ring Gear 10.50". Exc.Limited Slip Differential. Kit. Incl.Pinion Gears,Side Gears and Thrust Washers. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
With limited slip. All. Express, savana. Pinion gear. G30 vans. Ring Gear 10.50".
Pinion Washer
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Pinion Washer
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Pinion Shaft
Without limited slip. 10.50. Express, savana. All. G30 vans. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Ring & Pinion
All models. 10.50. 4.10 ratio. Express, savana. 4.10 ratio. Silverado, sierra. 2500. 10.50. 4.10 ratio. Drive Ratio 4.10. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors Original equipment parts are designed to work with your GM vehicle safety systems - aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
Pinion Bearings
Tapered roller bearing elements that support and allow the pinion gear to rotate within the axle or final drive housing This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
All models. With limited slip. Express, savana. Side gear. Right. Cam faced.
Side Washer
Limited Slip Differential. .027". This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Side Washer
All models. With limited slip. Left. Right. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Axle Cover
All models. 8.50, 8.625. Express, savana. S-series. G10-20 vans. 8.6 ring rear. 1/2 ton. Ring Gear 8.50". Ring Gear 8.625". Blazer/Sonoma/S10.
Cover Gasket
All. 8.6 ring rear. S-series. G10-20 vans. Express, savana. 3/4 ton. Blazer/Sonoma/S10. 1500. 8.50" & 8.625" ring gear without quadrasteer. 1/2 TON. 8.625 ring gear. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Axle Shafts
All. 2nd design. All models. 20, with 8.5 ring gear. 10, without positrac. G10-20 vans. 2nd desirn.
Axle Seals
Helps keep dirt and water out of your axle shaft assembly Conforms to the rotating surface to help provide leak-free operation This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Shaft Bearings
Help minimize wear and friction in a variety of applications on your vehicle
Without limited slip. All models. Express, savana. Blazer/Sonoma/S10. Without positraction.
Pinion Washer
These are Sold Individually. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
All models. 3.42 ratio. Buick, chevrolet, olds. 3.42 gear ratio. 8.50 ring gear.
Ring & Pinion
All models. 8.50, 8.625. 3.08 ratio. S-series. 3.08 ratio. Buick, chevrolet, olds. 3.08 gear ratio. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors Original equipment parts are designed to work with your GM vehicle safety systems - aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
Ring & Pinion
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors Original equipment parts are designed to work with your GM vehicle safety systems - aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
8 1/2 ring gear. 2.73 ratio. All models. 2.73 ratio. G10-20 vans. 2.73 ratio. Buick, chevrolet, olds. 2.73 gear ratio.
Pinion Bearings
Help minimize wear and friction in a variety of applications on your vehicle This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
All models. S-series. Express, savana. Ring Gear 8.50". Ring Gear 8.625". Exc.Triple Lip.
Side Washer
Right. Side washers. All. Without limited slip. G10-20 vans. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Axle Cover
All models. 9.50. Express, savana. 9.5 ring rear. Buick, chevrolet, olds. 9.00 ring gear. Without chip collector. 1/2, 3/4 & 1 ton, 1996 new style, 3/4 ton.
Axle Seals
Helps keep dirt and water out of your axle shaft assembly Conforms to the rotating surface to help provide leak-free operation This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Shaft Bearings
Help minimize wear and friction in a variety of applications on your vehicle
Differential Case
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Side Bearings
Low friction rotating elements that support the drive axle differential carrier within the axle or final drive housing This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Pinion Shaft
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Ring & Pinion
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors Original equipment parts are designed to work with your GM vehicle safety systems - aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
Ring & Pinion
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors Original equipment parts are designed to work with your GM vehicle safety systems - aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
All models. 3.23 ratio. G30 vans. 3.23 ratio. Express, savana. 3.23 ratio.
Pinion Seal
All. G30 vans. Express, savana. Buick, chevrolet, olds. 9.00 ring gear. Ring Gear 9.50".