Powertrain Control for 2005 Chevrolet Corvette
Ignition Coil Bracket
2003-05, 5.3L. 6.2L without supercharger. 6.0 & 6.2L. 7.0L. 2008-09. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Wire Connector
4.8, 5.3, 6.0 & 6.2L. 2003-05, 5.3L. 6.2L without supercharger. Wire connector. 7.0L. 2008-09. Insulated to help protect the interior conductor wire Form fitting boots on each end prevent moisture from entering the coil or distributor
PCM
5.3L. Grand Prix. Corvette. SSR. 6.0L. GTO. This part requires programming and/or special setup procedures GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors Refurbishing is an industry standard practice that returns parts into service rather than scrapping them Tested to ensure they perform to GM specifications
Mount Bracket
6.0 & 7.0L, 6.2l without supercharged. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors Original equipment parts are designed to work with your GM vehicle safety systems - aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
Connector
Upper, 4.6L. 6.0 & 7.0L, 6.2l without supercharged, 56-way, 6.0L, blue. Protective outer coverings help provide long-lasting durability Color-coded wires allow for easy installation This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Connector
Center, 4.6L. 6.0 & 7.0L, 6.2l without supercharged, 73-way, 6.0L. Protective outer coverings help provide long-lasting durability Color-coded wires allow for easy installation
Engine Harness
6.0 & 7.0L, 6.2l without supercharged, manual trans. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
Lower Housing Retainer, Left
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Lower Housing Nut, Left
Headlamp assy,retainer nut. Without supercharged, 6.0L. 2009. Mounting insert. With z51 package. Convertible, lower rails, 6mm. Coupe. With hid. With zr1. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Upper Housing Clip, Right
These are Sold Individually. Used to secure multiple components
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Element, Left
4.4L. Without supercharged, 6.0L. Corvette. Helps trap airborne particles before they enter the engine Excellent filter capacity and efficiency Allows airflow restriction to the engine for performance Equipped with tight seals to keep unfiltered air from entering the combustion chamber This GM Genuine part is designed, engineered and tested to rigorous standards, and are backed by General Motors
Outlet Duct Retainer
Used to secure multiple components This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Air Mass Sensor
Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Splash Shield
Without supercharged, 6.0L. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Related Parts
Crankshaft Position Sensor
Helps keep engine timing and fuel injection running in sync Helps provide proper alignment, positioning, and spacing for easy installation Synchronizes engine valves and pistons for excellent engine performance
Map Sensor
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Knock Sensor
Sends signals to the engine control module (ECM) to adjust timing Helps prevent damage to the engine caused by pre-ignition
Oxygen Sensor
This part requires programming and/or special setup procedures GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle Detects oxygen content in the exhaust gases to help optimize emissions This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Helps keep engine running at proper temperature. Alerts vehicle operator of high engine temperature conditions.
Corvette. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors